| Current Path : /lib64/perl5/vendor_perl/DateTime/ |
Linux gator3171.hostgator.com 4.19.286-203.ELK.el7.x86_64 #1 SMP Wed Jun 14 04:33:55 CDT 2023 x86_64 |
| Current File : //lib64/perl5/vendor_perl/DateTime/Duration.pm |
package DateTime::Duration;
{
$DateTime::Duration::VERSION = '1.04';
}
use strict;
use warnings;
use Carp ();
use DateTime;
use DateTime::Helpers;
use Params::Validate qw( validate SCALAR );
use overload (
fallback => 1,
'+' => '_add_overload',
'-' => '_subtract_overload',
'*' => '_multiply_overload',
'<=>' => '_compare_overload',
'cmp' => '_compare_overload',
);
use constant MAX_NANOSECONDS => 1_000_000_000; # 1E9 = almost 32 bits
my @all_units = qw( months days minutes seconds nanoseconds );
# XXX - need to reject non-integers but accept infinity, NaN, &
# 1.56e+18
sub new {
my $class = shift;
my %p = validate(
@_, {
years => { type => SCALAR, default => 0 },
months => { type => SCALAR, default => 0 },
weeks => { type => SCALAR, default => 0 },
days => { type => SCALAR, default => 0 },
hours => { type => SCALAR, default => 0 },
minutes => { type => SCALAR, default => 0 },
seconds => { type => SCALAR, default => 0 },
nanoseconds => { type => SCALAR, default => 0 },
end_of_month => {
type => SCALAR, default => undef,
regex => qr/^(?:wrap|limit|preserve)$/
},
}
);
my $self = bless {}, $class;
$self->{months} = ( $p{years} * 12 ) + $p{months};
$self->{days} = ( $p{weeks} * 7 ) + $p{days};
$self->{minutes} = ( $p{hours} * 60 ) + $p{minutes};
$self->{seconds} = $p{seconds};
if ( $p{nanoseconds} ) {
$self->{nanoseconds} = $p{nanoseconds};
$self->_normalize_nanoseconds;
}
else {
# shortcut - if they don't need nanoseconds
$self->{nanoseconds} = 0;
}
$self->{end_of_month} = (
defined $p{end_of_month} ? $p{end_of_month}
: $self->{months} < 0 ? 'preserve'
: 'wrap'
);
return $self;
}
# make the signs of seconds, nanos the same; 0 < abs(nanos) < MAX_NANOS
# NB this requires nanoseconds != 0 (callers check this already)
sub _normalize_nanoseconds {
my $self = shift;
return
if ( $self->{nanoseconds} == DateTime::INFINITY()
|| $self->{nanoseconds} == DateTime::NEG_INFINITY()
|| $self->{nanoseconds} eq DateTime::NAN() );
my $seconds = $self->{seconds} + $self->{nanoseconds} / MAX_NANOSECONDS;
$self->{seconds} = int($seconds);
$self->{nanoseconds} = $self->{nanoseconds} % MAX_NANOSECONDS;
$self->{nanoseconds} -= MAX_NANOSECONDS if $seconds < 0;
}
sub clone { bless { %{ $_[0] } }, ref $_[0] }
sub years { abs( $_[0]->in_units('years') ) }
sub months { abs( $_[0]->in_units( 'months', 'years' ) ) }
sub weeks { abs( $_[0]->in_units('weeks') ) }
sub days { abs( $_[0]->in_units( 'days', 'weeks' ) ) }
sub hours { abs( $_[0]->in_units('hours') ) }
sub minutes { abs( $_[0]->in_units( 'minutes', 'hours' ) ) }
sub seconds { abs( $_[0]->in_units('seconds') ) }
sub nanoseconds { abs( $_[0]->in_units( 'nanoseconds', 'seconds' ) ) }
sub is_positive { $_[0]->_has_positive && !$_[0]->_has_negative }
sub is_negative { !$_[0]->_has_positive && $_[0]->_has_negative }
sub _has_positive {
( grep { $_ > 0 } @{ $_[0] }{@all_units} ) ? 1 : 0;
}
sub _has_negative {
( grep { $_ < 0 } @{ $_[0] }{@all_units} ) ? 1 : 0;
}
sub is_zero {
return 0 if grep { $_ != 0 } @{ $_[0] }{@all_units};
return 1;
}
sub delta_months { $_[0]->{months} }
sub delta_days { $_[0]->{days} }
sub delta_minutes { $_[0]->{minutes} }
sub delta_seconds { $_[0]->{seconds} }
sub delta_nanoseconds { $_[0]->{nanoseconds} }
sub deltas {
map { $_ => $_[0]->{$_} } @all_units;
}
sub in_units {
my $self = shift;
my @units = @_;
my %units = map { $_ => 1 } @units;
my %ret;
my ( $months, $days, $minutes, $seconds )
= @{$self}{qw( months days minutes seconds )};
if ( $units{years} ) {
$ret{years} = int( $months / 12 );
$months -= $ret{years} * 12;
}
if ( $units{months} ) {
$ret{months} = $months;
}
if ( $units{weeks} ) {
$ret{weeks} = int( $days / 7 );
$days -= $ret{weeks} * 7;
}
if ( $units{days} ) {
$ret{days} = $days;
}
if ( $units{hours} ) {
$ret{hours} = int( $minutes / 60 );
$minutes -= $ret{hours} * 60;
}
if ( $units{minutes} ) {
$ret{minutes} = $minutes;
}
if ( $units{seconds} ) {
$ret{seconds} = $seconds;
$seconds = 0;
}
if ( $units{nanoseconds} ) {
$ret{nanoseconds} = $seconds * MAX_NANOSECONDS + $self->{nanoseconds};
}
wantarray ? @ret{@units} : $ret{ $units[0] };
}
sub is_wrap_mode { $_[0]->{end_of_month} eq 'wrap' ? 1 : 0 }
sub is_limit_mode { $_[0]->{end_of_month} eq 'limit' ? 1 : 0 }
sub is_preserve_mode { $_[0]->{end_of_month} eq 'preserve' ? 1 : 0 }
sub end_of_month_mode { $_[0]->{end_of_month} }
sub calendar_duration {
my $self = shift;
return ( ref $self )
->new( map { $_ => $self->{$_} } qw( months days end_of_month ) );
}
sub clock_duration {
my $self = shift;
return ( ref $self )
->new( map { $_ => $self->{$_} }
qw( minutes seconds nanoseconds end_of_month ) );
}
sub inverse {
my $self = shift;
my %p = @_;
my %new;
foreach my $u (@all_units) {
$new{$u} = $self->{$u};
# avoid -0 bug
$new{$u} *= -1 if $new{$u};
}
$new{end_of_month} = $p{end_of_month}
if exists $p{end_of_month};
return ( ref $self )->new(%new);
}
sub add_duration {
my ( $self, $dur ) = @_;
foreach my $u (@all_units) {
$self->{$u} += $dur->{$u};
}
$self->_normalize_nanoseconds if $self->{nanoseconds};
return $self;
}
sub add {
my $self = shift;
return $self->add_duration( ( ref $self )->new(@_) );
}
sub subtract_duration { return $_[0]->add_duration( $_[1]->inverse ) }
sub subtract {
my $self = shift;
return $self->subtract_duration( ( ref $self )->new(@_) );
}
sub multiply {
my $self = shift;
my $multiplier = shift;
foreach my $u (@all_units) {
$self->{$u} *= $multiplier;
}
$self->_normalize_nanoseconds if $self->{nanoseconds};
return $self;
}
sub compare {
my ( $class, $dur1, $dur2, $dt ) = @_;
$dt ||= DateTime->now;
return DateTime->compare( $dt->clone->add_duration($dur1),
$dt->clone->add_duration($dur2) );
}
sub _add_overload {
my ( $d1, $d2, $rev ) = @_;
( $d1, $d2 ) = ( $d2, $d1 ) if $rev;
if ( DateTime::Helpers::isa( $d2, 'DateTime' ) ) {
$d2->add_duration($d1);
return;
}
# will also work if $d1 is a DateTime.pm object
return $d1->clone->add_duration($d2);
}
sub _subtract_overload {
my ( $d1, $d2, $rev ) = @_;
( $d1, $d2 ) = ( $d2, $d1 ) if $rev;
Carp::croak(
"Cannot subtract a DateTime object from a DateTime::Duration object")
if DateTime::Helpers::isa( $d2, 'DateTime' );
return $d1->clone->subtract_duration($d2);
}
sub _multiply_overload {
my $self = shift;
my $new = $self->clone;
return $new->multiply(@_);
}
sub _compare_overload {
Carp::croak( 'DateTime::Duration does not overload comparison.'
. ' See the documentation on the compare() method for details.'
);
}
1;
# ABSTRACT: Duration objects for date math
__END__
=pod
=head1 NAME
DateTime::Duration - Duration objects for date math
=head1 VERSION
version 1.04
=head1 SYNOPSIS
use DateTime::Duration;
$dur = DateTime::Duration->new(
years => 3,
months => 5,
weeks => 1,
days => 1,
hours => 6,
minutes => 15,
seconds => 45,
nanoseconds => 12000
);
my ( $days, $hours, $seconds ) = $dur->in_units('days', 'hours', 'seconds');
# Human-readable accessors, always positive, but consider using
# DateTime::Format::Duration instead
$dur->years;
$dur->months;
$dur->weeks;
$dur->days;
$dur->hours;
$dur->minutes;
$dur->seconds;
$dur->nanoseconds;
$dur->is_wrap_mode
$dur->is_limit_mode
$dur->is_preserve_mode
print $dur->end_of_month_mode;
# Multiply all values by -1
my $opposite = $dur->inverse;
my $bigger = $dur1 + $dur2;
my $smaller = $dur1 - $dur2; # the result could be negative
my $bigger = $dur1 * 3;
my $base_dt = DateTime->new( year => 2000 );
my @sorted =
sort { DateTime::Duration->compare( $a, $b, $base_dt ) } @durations;
if ( $dur->is_positive ) { ... }
if ( $dur->is_zero ) { ... }
if ( $dur->is_negative ) { ... }
=head1 DESCRIPTION
This is a simple class for representing duration objects. These
objects are used whenever you do date math with DateTime.pm.
See the L<How DateTime Math Works|DateTime/"How DateTime Math Works"> section
of the DateTime.pm documentation for more details. The short course: One
cannot in general convert between seconds, minutes, days, and months, so this
class will never do so. Instead, create the duration with the desired units to
begin with, for example by calling the appropriate subtraction/delta method on
a C<DateTime.pm> object.
=head1 METHODS
Like C<DateTime> itself, C<DateTime::Duration> returns the object from
mutator methods in order to make method chaining possible.
C<DateTime::Duration> has the following methods:
=head2 DateTime::Duration->new( ... )
This method takes the parameters "years", "months", "weeks", "days",
"hours", "minutes", "seconds", "nanoseconds", and "end_of_month". All
of these except "end_of_month" are numbers. If any of the numbers are
negative, the entire duration is negative.
All of the numbers B<must be integers>.
Internally, years as just treated as 12 months. Similarly, weeks are
treated as 7 days, and hours are converted to minutes. Seconds and
nanoseconds are both treated separately.
The "end_of_month" parameter must be either "wrap", "limit", or
"preserve". This parameter specifies how date math that crosses the
end of a month is handled.
In "wrap" mode, adding months or years that result in days beyond the
end of the new month will roll over into the following month. For
instance, adding one year to Feb 29 will result in Mar 1.
If you specify "end_of_month" mode as "limit", the end of the month is
never crossed. Thus, adding one year to Feb 29, 2000 will result in
Feb 28, 2001. If you were to then add three more years this will
result in Feb 28, 2004.
If you specify "end_of_month" mode as "preserve", the same calculation
is done as for "limit" except that if the original date is at the end
of the month the new date will also be. For instance, adding one
month to Feb 29, 2000 will result in Mar 31, 2000.
For positive durations, the "end_of_month" parameter defaults to wrap.
For negative durations, the default is "limit". This should match how
most people "intuitively" expect datetime math to work.
=head2 $dur->clone()
Returns a new object with the same properties as the object on which
this method was called.
=head2 $dur->in_units( ... )
Returns the length of the duration in the units (any of those that can
be passed to C<new>) given as arguments. All lengths are integral,
but may be negative. Smaller units are computed from what remains
after taking away the larger units given, so for example:
my $dur = DateTime::Duration->new( years => 1, months => 15 );
$dur->in_units( 'years' ); # 2
$dur->in_units( 'months' ); # 27
$dur->in_units( 'years', 'months' ); # (2, 3)
$dur->in_units( 'weeks', 'days' ); # (0, 0) !
The last example demonstrates that there will not be any conversion
between units which don't have a fixed conversion rate. The only
conversions possible are:
=over 8
=item * years <=> months
=item * weeks <=> days
=item * hours <=> minutes
=item * seconds <=> nanoseconds
=back
For the explanation of why this is the case, please see the L<How DateTime
Math Works|DateTime/"How DateTime Math Works"> section of the DateTime.pm
documentation
Note that the numbers returned by this method may not match the values
given to the constructor.
In list context, in_units returns the lengths in the order of the units
given. In scalar context, it returns the length in the first unit (but
still computes in terms of all given units).
If you need more flexibility in presenting information about
durations, please take a look a C<DateTime::Format::Duration>.
=head2 $dur->is_positive(), $dur->is_zero(), $dur->is_negative()
Indicates whether or not the duration is positive, zero, or negative.
If the duration contains both positive and negative units, then it
will return false for B<all> of these methods.
=head2 $dur->is_wrap_mode(), $dur->is_limit_mode(), $dur->is_preserve_mode()
Indicates what mode is used for end of month wrapping.
=head2 $dur->end_of_month_mode()
Returns one of "wrap", "limit", or "preserve".
=head2 $dur->calendar_duration()
Returns a new object with the same I<calendar> delta (months and days
only) and end of month mode as the current object.
=head2 $dur->clock_duration()
Returns a new object with the same I<clock> deltas (minutes, seconds,
and nanoseconds) and end of month mode as the current object.
=head2 $dur->inverse( ... )
Returns a new object with the same deltas as the current object, but
multiple by -1. The end of month mode for the new object will be the
default end of month mode, which depends on whether the new duration
is positive or negative.
You can set the end of month mode in the inverted duration explicitly by
passing "end_of_month => ..." to the C<inverse()> method.
=head2 $dur->add_duration( $duration_object ), $dur->subtract_duration( $duration_object )
Adds or subtracts one duration from another.
=head2 $dur->add( ... ), $dur->subtract( ... )
Syntactic sugar for addition and subtraction. The parameters given to
these methods are used to create a new object, which is then passed to
C<add_duration()> or C<subtract_duration()>, as appropriate.
=head2 $dur->multiply( $number )
Multiplies each unit in the by the specified number.
=head2 DateTime::Duration->compare( $duration1, $duration2, $base_datetime )
This is a class method that can be used to compare or sort durations.
Comparison is done by adding each duration to the specified
C<DateTime.pm> object and comparing the resulting datetimes. This is
necessary because without a base, many durations are not comparable.
For example, 1 month may or may not be longer than 29 days, depending
on what datetime it is added to.
If no base datetime is given, then the result of C<< DateTime->now >>
is used instead. Using this default will give non-repeatable results
if used to compare two duration objects containing different units.
It will also give non-repeatable results if the durations contain
multiple types of units, such as months and days.
However, if you know that both objects only consist of one type of
unit (months I<or> days I<or> hours, etc.), and each duration contains
the same type of unit, then the results of the comparison will be
repeatable.
=head2 $dur->delta_months(), $dur->delta_days(), $dur->delta_minutes(), $dur->delta_seconds(), $dur->delta_nanoseconds()
These methods provide the information C<DateTime.pm> needs for doing date
math. The numbers returned may be positive or negative. This is mostly useful
for doing date math in L<DateTime>.
=head2 $dur->deltas()
Returns a hash with the keys "months", "days", "minutes", "seconds", and
"nanoseconds", containing all the delta information for the object. This is
mostly useful for doing date math in L<DateTime>.
=head2 $dur->years(), $dur->months(), $dur->weeks(), $dur->days(), $dur->hours(), $dur->minutes(), $dur->seconds(), $dur->nanoseconds()
These methods return numbers indicating how many of the given unit the
object represents, after having done a conversion to any larger units.
For example, days are first converted to weeks, and then the remainder
is returned. These numbers are always positive.
Here's what each method returns:
$dur->years() == abs( $dur->in_units('years') )
$dur->months() == abs( ( $dur->in_units( 'months', 'years' ) )[0] )
$dur->weeks() == abs( $dur->in_units( 'weeks' ) )
$dur->days() == abs( ( $dur->in_units( 'days', 'weeks' ) )[0] )
$dur->hours() == abs( $dur->in_units( 'hours' ) )
$dur->minutes == abs( ( $dur->in_units( 'minutes', 'hours' ) )[0] )
$dur->seconds == abs( $dur->in_units( 'seconds' ) )
$dur->nanoseconds() == abs( ( $dur->in_units( 'nanoseconds', 'seconds' ) )[0] )
If this seems confusing, remember that you can always use the
C<in_units()> method to specify exactly what you want.
Better yet, if you are trying to generate output suitable for humans,
use the C<DateTime::Format::Duration> module.
=head2 Overloading
This class overloads addition, subtraction, and mutiplication.
Comparison is B<not> overloaded. If you attempt to compare durations
using C<< <=> >> or C<cmp>, then an exception will be thrown! Use the
C<compare()> class method instead.
=head1 SUPPORT
Support for this module is provided via the datetime@perl.org email
list. See http://lists.perl.org/ for more details.
=head1 SEE ALSO
datetime@perl.org mailing list
http://datetime.perl.org/
=head1 AUTHOR
Dave Rolsky <autarch@urth.org>
=head1 COPYRIGHT AND LICENSE
This software is Copyright (c) 2013 by Dave Rolsky.
This is free software, licensed under:
The Artistic License 2.0 (GPL Compatible)
=cut